Страница 1 из 1

Автоматические включение D-Link DNS-323 после сбоев питания

Добавлено: 19 июл 2012 20:19, Чт
UncleFather

Проблема:

Имеется сетевой накопитель (NAS) D-Link DNS-323. F/W version: 1.10 (04/06/2011) H/W version: B1.

Не включается автоматически после подачи на него электропитания. В настройке нет никаких пунктов, касающихся этой проблемы.

Как сделать так, чтобы DNS-323 включался автоматически при возобновлении электропитания?

Решение:

As a manufacturer of embedded computers we have a special appreciation of the DNS-323 – it's a beautiful little embedded network server. We're using it as a backup server where it's important that it resumes its duties after a power failure. So we needed a circuit to automatically turn it on a short while after AC line voltage is restored after a power down from a UPS-signaled power failure or other power failure. It seems to work well, so we thought others might find it useful.
Here's a circuit using a NE556N dual timer IC that automatically turns the DNS-323 on whenever power is first applied or re-applied after power failure. This circuit is applicable to the DNS-323 hardware version B1:

hardware-delayed_on_pulse.png
hardware-delayed_on_pulse.png (9.74 КБ) 5713 просмотров

Для других аппаратных реализаций накопителя D-Link DNS-323 смотрим схемы здесь.

Источник.